This professional acoustic matt consists of mineral fillers and polyurethane binders. It convinces with its walking sound reduction, low thermal resistance and integrated moisture protection

This insulation board made of wood fibres is conditionally suitable for both underfloor heating and thermal insulation (R-Value for the total floor construction ‹ 0,15 m2 K/W). Due to the high wood content, a PE foil must be placed underneath as moisture protection when laying on mineral substrates.

This 5 mm thick folded matt made of extruded polystyrene has the best insulating features and impact sound within the add2 range. Irregularities in the sub-floor of up to 4,6 mm can readily be evened out.

The 2.2 mm thin foldable matt is easy and quick to lay out due to its bonded aluminium layer and the integrated adhesive tape.

Especially when laying on new substrates and in case of essential temperature differences with the rooms below, a PE foil must be used as a vapour barrier. It prevents moisture damage to the upper and lower sections of the floor.

The transition profile ensures a seamless transition and can compensate for height differences up to 2 mm.

The ramp profile guarantees attractive transitions and allows for height compensation up to 16 mm.

Our two-part end profile screw-in systems are ideal for wall connections and for edging of balcony doors.

Suitable for joining laminate and parquet flooring of the same height. The upper profile with the toothed connector locks into the base profile, adapting automatically to the flooring. The profile allows for an angle up to 10° and height compensation up to 6 mm.

Suitable for joining laminate and parquet flooring of different heights. The click-profile system compensates for heights up to 17.5 mm.

Suitable for creating tidy edges on walls and other borders with laminate and parquet floorings.

The profile system is ideal for floor coverings in the thickness range 8-14 mm.

For vinyl/SPC flooring with an identical height, design-click transition profiles are suitable for floor coverings in the thickness range 4 - 7.5 mm. This elegant aluminum expansion joint cover was specifically designed for Rocko Flooring by Kronospan.

Compensation profiles are used where floor coverings of different heights meet. This design-click-profile system, specially developed for Rocko Flooring by Kronospan, guarantees attractive transitions and compensates for height differences up to 7.5 mm.

This aluminium profile is used to create clean edges on walls and borders for Rocko SPC flooring. The design-click profile system is suitable for floor coverings in the thickness range 4 - 7.5 mm.

The modern 19 mm deep MDF skirting board perfectly covers the expansion joint of the floor. It is covered with wood-patterned foil and is secured with the montage clips provided.

This modern 18 mm deep MDF skirting board in straight shape perfectly covers the expansion joint of the floor. It can be secured with the montage clips provided. Laying cables behind the skirting is possible.

The 70 mm x 21 mm skirting board is ideal for refurbishment projects and covers the expansion joint completely. It is attached by montage clips.

This high, straight skirting board without routing has been designed for simple installation with nails, screws or with adhesive tape.

Using the skirting board in the form of a quarter bar, it is possible to create a discreet filigree finish on the wall. Available in different wood finishes, they can be easily fixed in place using glue or nails.

This new 50 mm high skirting board follows the current trend towards straight-edged square skirting. With a depth of 18 mm it completely covers the expansion joint. It can be fastened using montage clips.

This modern straight MDF skirting board comes in five different metal-effects foils. It is fastened with the montage clips. Laying cables behind the skirting is possible.

This paintable skirting board looks particularly modern due to its sheathing with the priming film and its cubic design. The 100 mm skirting board can easily be fixed in place using glue, nails or screws while the 70/58 mm version can be attached using montage clips. Available in white .

This classic profiled skirting board is covered with base foil. The 100 mm skirting board can easily be fixed in place using glue, nails or screws while the 70/58 mm version can be attached using montage clips. Available in white.

This modern-looking skirting board is also covered in base foil, but comes with a rounded top edge. It can easily be fixed in place using glue, nails or screws. The 70 mm high skirting board can be fixed in place using montage clips. Available in white.

This multifunctional skirting board allows cables to be concealed behind it. The cover can subsequently be opened to allow the cables to be easily rerouted or exchanged. It is fixed in place with a bracket. Available in different colors.

Mouldings for the K40C skirting board are simply placed on the ends of the skirting boards and are available in different solid colours. It is possible to lay cables behind the corner pieces.

Mouldings for the K58C skirting board are simply placed on the ends of the skirting board, which means there is no need to cut a mitre. It is possible to lay cables behind the corner pieces. Available in different solid colours.

15-metre skirting boards can be assembled quickly, simply and professionally using the contents of a single pack. The set comes complete with screws and rawl plugs. Cables can be laid behind skirting boards using the clips as a guide.

Aluminium tape is used for moisture-proof bonding of insulation materials.

A polyethylene tap-block is used for an accurate and smooth installation.

The ideal installation aid for floating floors.

This joint sealant offers protection from moisture for all non-adhesive floor laying systems. And there is no problem with re-laying the floor after a relocation – Clickguard^TM is non-adhesive. A single tube is enough for an approximate length of 10 m² .

With the wax repair kit, it is possible to quickly and easily repair damages such as deep scratches, splits, chips, small holes and dents. The coloured water based wax sticks can be mixed with each other. Due to missing shrinkage and quick drying you can quickly accomplish repairs.

This special cleaning agent has been developed to clean and maintain all laminate floors. The cleaner removes dirt, grease and scuffmarks. Bad odours are neutralised by the agent’s formula and this ensures better room air when used regularly.

This special cleaning agent does a great job, removing greasy residues from our Rocko Flooring by Kronospan, thanks to its excellent dirt-binding properties. It does not damage the finish and leaves no grey film.