Acoustic underlay, 1 mm thick, particularly suitable for floating flooring with the O.R.C.A. Moisture Defense Technology. Recommended accessories: EP vapour barrier, aluminium self-adhesive joint tape. Ideal for underfloor heating

The 3-in-1 profile has been specially designed for flooring with O.R.C.A. moisture defense technology. It offers a universal solution for transitions, height compensation and seals. Adapted to the specific conditions of your floor, the profile can be secured using adhesives or dowels.

This professional acoustic matt consists of mineral fillers and polyurethane binders. It convinces with its walking sound reduction, low thermal resistance and integrated moisture protection

This insulation board made of wood fibres is conditionally suitable for both underfloor heating and thermal insulation (R-Value for the total floor construction ‹ 0,15 m2 K/W). Due to the high wood content, a PE foil must be placed underneath as moisture protection when laying on mineral substrates.

The modern skirting board with the O.R.C.A. carrier plate with a depth of 18 mm completely covers the expansion joint. It is secured using mounting brackets. Cables may be laid behind the skirting board.

Especially when laying on new substrates and in case of essential temperature differences with the rooms below, a PE foil must be used as a vapour barrier. It prevents moisture damage to the upper and lower sections of the floor.

The transition profile ensures a seamless transition and can compensate for height differences up to 2 mm.

The ramp profile guarantees attractive transitions and allows for height compensation up to 16 mm.

Our two-part end profile screw-in systems are ideal for wall connections and for edging of balcony doors.

Suitable for joining laminate and parquet flooring of the same height. The upper profile with the toothed connector locks into the base profile, adapting automatically to the flooring. The profile allows for an angle up to 10° and height compensation up to 6 mm.

Suitable for joining laminate and parquet flooring of different heights. The click-profile system compensates for heights up to 17.5 mm.

Suitable for creating tidy edges on walls and other borders with laminate and parquet floorings.

The profile system is ideal for floor coverings in the thickness range 8-14 mm.

This multifunctional skirting board allows cables to be concealed behind it. The cover can subsequently be opened to allow the cables to be easily rerouted or exchanged. It is fixed in place with a bracket. Available in different colors.

The tapping block is manufactured from solid beech, making it easier to lay the flooring with the O.R.C.A. Moisture Defense Technology.

This special product has been developed to clean and care for flooring using O.R.C.A. Moisture Defense Technology. The cleaning agent removes dirt, grease and scuff marks. It neutralises unpleasant odours and regular use of the active formula improves the air quality in the room.

The ideal installation aid for floating floors.

This joint sealant offers protection from moisture for all non-adhesive floor laying systems. And there is no problem with re-laying the floor after a relocation – Clickguard^TM is non-adhesive. A single tube is enough for an approximate length of 10 m² .

With the wax repair kit, it is possible to quickly and easily repair damages such as deep scratches, splits, chips, small holes and dents. The coloured water based wax sticks can be mixed with each other. Due to missing shrinkage and quick drying you can quickly accomplish repairs.