Mystyle insulating underlay 1.5 mm for the elegant designer flooring from Mystyle. Well suited for floor heating.

Recommended accessories: PE moisture barriers and aluminium adhesive tape.

The modern MDF skirting board is available in decorative finishes to match the Mystyle flooring and ensures a clean wall finish. The mounting clips, screws and dowels are all included in the delivery, so there‘s no need to worry about not having enough fasteners.

The 3-in-1 profile is available in decorative finishes to match all Mystyle floors and compensates for height differences up to 6 mm. This 3-in-1 profile provides a universal solution for transitions, height compensation and edging.

Mouldings for the K58C skirting board are simply placed on the ends of the skirting board, which means there is no need to cut a mitre. It is possible to lay cables behind the corner pieces.

Especially when laying on new substrates and in case of essential temperature differences with the rooms below, a PE foil must be used as a vapour barrier. It prevents moisture damage to the upper and lower sections of the floor.

The transition profile ensures a seamless transition and can compensate for height differences up to 2 mm.

The ramp profile guarantees attractive transitions and allows for height compensation up to 16 mm.

Our two-part end profile screw-in systems are ideal for wall connections and for edging of balcony doors.

Suitable for joining laminate and parquet flooring of the same height. The upper profile with the toothed connector locks into the base profile, adapting automatically to the flooring. The profile allows for an angle up to 10° and height compensation up to 6 mm.

Suitable for joining laminate and parquet flooring of different heights. The click-profile system compensates for heights up to 17.5 mm.

Suitable for creating tidy edges on walls and other borders with laminate and parquet floorings.

The profile system is ideal for floor coverings in the thickness range 8-14 mm.

This modern straight MDF skirting board comes in five different metal-effects foils. It is fastened with the montage clips. Laying cables behind the skirting is possible.

This paintable skirting board looks particularly modern due to its sheathing with the priming film and its cubic design. The 100 mm skirting board can easily be fixed in place using glue, nails or screws while the 70/58 mm version can be attached using montage clips. Available in white .

This classic profiled skirting board is covered with base foil. The 100 mm skirting board can easily be fixed in place using glue, nails or screws while the 70/58 mm version can be attached using montage clips. Available in white.

This modern-looking skirting board is also covered in base foil, but comes with a rounded top edge. It can easily be fixed in place using glue, nails or screws. The 70 mm high skirting board can be fixed in place using montage clips. Available in white.

This multifunctional skirting board allows cables to be concealed behind it. The cover can subsequently be opened to allow the cables to be easily rerouted or exchanged. It is fixed in place with a bracket. Available in different colors.

A Mystyle Elegant Designer Flooring treatment for high-quality flooring. This cleaning product has been specially designed with a formula to clean your Mystyle floors and deliver a brilliant shine.

A polyethylene tap-block is used for an accurate and smooth installation.

The ideal installation aid for floating floors.

This joint sealant offers protection from moisture for all non-adhesive floor laying systems. And there is no problem with re-laying the floor after a relocation – Clickguard^TM is non-adhesive. A single tube is enough for an approximate length of 10 m² .

With the wax repair kit, it is possible to quickly and easily repair damages such as deep scratches, splits, chips, small holes and dents. The coloured water based wax sticks can be mixed with each other. Due to missing shrinkage and quick drying you can quickly accomplish repairs.